| ||||||||
How To Test for Mold with our Do-It-Yourself Kits
Your first and most affordable
mold investigative step to learn the severity and the extent of the possible mold infestation
is to use our do it yourself mold test kits [self observation of results over a 5 to 7 day
time period, or send in for
mold lab analysis] to mold test the air of each room, attic, basement, crawl space, and
the outward air flow from each heating/cooling duct register for the possible presence of
elevated levels of airborne mold spores, in comparison to an outdoor mold control test which
you should also do. If you see any visible mold growth, from each moldy area, scrape some of
the mold particles into a separate mold test kit per testing location for observation over a 5
to 7 day time period, and/or for mold lab analysis. When scraping mold into a test kit, you
would be wise to use a breathing air respirator [Home Depot or Lowe’s or a safety store] so
that you don’t breathe in extra mold spores that you put into the air by scraping some
mold-like substances into each mold test kit.
| ||||||||||||||||||||||||||||||
|
Step 3. Use our home test kit to collect air samples [plus test samples of visible mildew growth], and then observe the growth of mildew [if fungi spores are present] in each test kit for at least 5 to 7 days yourself.
[Alternatively, if you want professional mold laboratory identification services for ALL of your home test kit samples, please proceed to Step 4 below.]
5 to 7 days [or more] after you have
done an air or visible mildew sampling, here’s how to interpret the visual results apparent in
your home test kits:
(1) If you observe and count a greater number of fungi colonies of any one particular fungi colony type [possessing the same or similar color, shape, and/or structural pattern] growing in ONE testing kit than you observe and count in the outdoor control testing kit, then you can reasonably conclude that there is a possible indoor-generated mold infestation in the area location in which you conducted that particular testing.
(2) If you observe a particular mildew colony type growing in ONE home test kit that is NOT present in the outdoor control home test kit, then you can reasonably conclude that there is a possible indoor-generated infestation in the area location in which you conducted that particular testing.
(3) If you observe three or more of the SAME mold colony type growing in ONE home test kit, then you can reasonably conclude that there is a possible mold infestation in the area location in which you conducted that particular test, regardless of outdoor control test.
Think about this rat analogy: if there are only three rats living INSIDE a particular area of your home, is there no indoor rat problem if more than three rats are living immediately OUTSIDE of your home?
You live or work in your home or building many hours per day. Your continual inhaling of mold spores into your sinus areas or into your lungs can initiate dangerous fungi growth inside your body! You can become very ill from continued, CUMULATIVE exposure to, and continued, regular, and cumulative inhalation of, even modest numbers of mold spores.
(4) If you observe three or more of the same mildew colony types in each of several or many home test kits taken from different areas of your home or building, you can reasonably conclude that that particular mildew species is possibly widespread in its contamination of your home or building.
The most dangerous mold species to you and other home or building occupants are the molds that are present in many areas of your home or building, causing continued and cumulative exposure and mold inhalation.
Step 4. If you detect a mold problem after completing Step 3 above, or if you want to proceed directly to professional mold laboratory analysis, then you have the following options [do one or all] ---
(1) Send one or more of your test kit samples [especially the ones with the most visible mold growth] for professional analysis, identification, and a written report by Mold Inspector Laboratory Ltd.
Expert mold analysis report is especially important if you are:
(a) considering the purchase or sale of a house or other real estate;
(b) making or defending a mold liability claim in regards to the rental of [or the already-completed sale or purchase of] a house, condo, apartment or other real estate building; or;
(c) making or defending a claim regarding mold problems in the work place or a public building such as a school, hospital, nursing home, or government office. If you so desire, you can pre-pay your mold laboratory mold identification services when you purchase your mold test kits.
Please visit: Order Page.
(2) Alternatively, don’t worry about mold identification because the remediation procedures that you or a Certified Mold Remediator must do to kill and remove mold are the same regardless of the type of fungi. Consider using your limited financial resources to do effective removal in accordance with the precise remediation directions provided in our book Do-It-BEST-Yourself Mold Prevention, Inspection, Testing and Remediation.
(3) Do follow up, intensive, and detailed inspection and testing of your home or other building to find and fix:
(a) water problems that are causing the mildew problem [such as high humidity above 60%], roof leaks, plumbing leaks, and water intrusion into your hvac equipment and ducts, and;
(b) mildew growth, especially fungi hidden INSIDE walls, ceilings, floors, attic, crawl space, and hvac equipment and ducts. You can do this thorough, follow up inspection and testing either with the help of one of our Certified Mold Inspectors, or by Do-It-BEST-Yourself inspection and testing using the very precise directions in our book Do-It-BEST-Yourself Mold Prevention, Inspection, Testing & Remediation.
|
RETURN/REFUND
POLICY: Mold Mart sells only the highest-quality, most-effective environmental products and services which are always brand new [and which have never been returned by a customer] to avoid the possibility of prior customer use, water dilution, and/or contamination which could cause poor product performance and/or mold or other environmental cross-contamination from one customer's property to another's property. Thus, your purchase of our products and services are non-returnable and non-refundable. |
Mold Test
Kit Q & A
Q. Hi! I have read through your website and
really appreciate all of the information. Question for you: How accurate are the HOME
MOLD TESTS? Here's the situation: My family currently lives in a rental. We
suspected high levels of indoor mold due to some symptoms that our family was showing.
We bought a few home mold tests and tested two rooms and had one control test outside.
Within 48 hours, the bottom of the petri dishes from the inside rooms were covered with mold
and the one from the outside only had a few mold growths. So we took the test to our
landlord and he is claiming that the tests are inaccurate and thinks we are wrong about our
theory (that we are potentially living in a dangerous situation.) I have called a
local home inspection service and they don’t know much about the home tests, but say that the
tests would be inaccurate by not showing all of the airborne mold. Hence we have even
more airborne mold than the petri dishes show. So what are your thoughts on the accuracy
of the home tests? [November 24, 2004]
A.
Yes, it is very likely that your rental unit has more mold than is reflected in taking just a
few do it yourself mold test kits because each kit is only measuring a specific area of your
home. You should use our mold test kits to mold test the air of EACH room, any
attic/basement/crawl space/garage, and the outward air flow from each heating/cooling duct
register for the possible presence of elevated levels of airborne mold spores, in comparison
with your outdoor mold control sample. This is called total home testing. But not even mold
inspectors often do total home testing because of a limited customer budget for professional
testing services [much more expensive than home mold test kits]. Home mold test kits are very
accurate in detecting mold levels in rooms and areas tested, and far more accurate in mold
diagnosis than the inferior air cassette testing done by most mold inspectors and industrial
hygienists. Because you already have mold test results showing elevated levels of indoor mold
compared to the outdoor test you have already done, you should send all of the mold test kits
to our mold lab for analysis and mold species identification [visit:
http://www.moldmart.net]. Then you will have written mold lab results from an accredited
mold lab that identifies the mold species occupying your home, plus some quantification as to
the severity of the mold health threat. You should then consider utilizing the Tenant
Notice To Landlord which is available at
http://www.moldinspector.com/landlord_liability.htm
Any mold test kit questions we can answer for you?
If you have a question about how to inspect and mold test
your home or other building, or about how to use our patented mold test kits, or about our
mold laboratory mold identification services, or about mold removal and mold remediation,
please email our manager, mold expert Phillip Fry
moldconsultant@yahoo.com. Phil is a Certified Mold Inspector, Certified Mold
Contractor, Certified Environmental Inspector, and author of the mold advice book
Do it BEST yourself Mold
Book.
PAYMENT
OPTIONS
You can order our Mold Test Kit in different
ways
Online
American Express Card Payment.
You can pay for our mold products and services online with
your AMEX card by clicking on the checkout button below.
Online Visa, MasterCard,
American Express, Discover Card, PayPal, or checking
account payment with
SHOPPAL Online
Catalog or Shopping Cart.
You can pay
for our mold products and services by clicking on the "Secure
Payment" button below.
Online Visa,
MasterCard, American Express, or Discover Card payment through
PAYPAL
Online Product Catalog/Shopping
Cart.
You can pay for our mold products and services online with
your Visa, Master Card, American
Express Card, or Discover Card by clicking on the
checkout button below.
CHECKING ACCOUNT or Credit Card
payment through
PAYPAL.
You can pay
for our mold products and services online from your
CHECKING ACCOUNT with your Visa, Master Card, American
Express, or Discover card by logging in to your
Paypal account and sending your payment to
moldinspector@yahoo.com. If you are not yet a member, you
can easily sign-up at the
Paypal website.
You can also benefit from the
Entire Mold Library three $49-worth mold books for only
$98 if you use
Paypal.
Purchase
online using Visa,
MasterCard, American Express, Discover card, JCB, & Diners
Club Payment.
You can buy
our mold products and services online from 2Checkout.com,
using Visa, Master Card, AMEX,
Discover Card, JCB, or Diners Club by clicking on the
checkout button below.
2Checkout.com, Inc. is an authorized retailer of goods and
services provided by Mold Mart.
Order by
FAX with your Credit
Card.
You can pay for our mold products and services with your
Credit Card through our
FAX Order Form.

PLACE YOUR PHONE ORDER FOR
MOLD PRODUCTS OR SERVICES,
OR ASK YOUR MOLD PRODUCTS AND SERVICES QUESTIONS THRU THE FREE
YAHOO MESSENGER WITH VOICE!
You
can use the FREE Yahoo Messenger with Voice to place your
order or ask your questions about mold testing and remediation
products and services. To do so, simply log-in to Yahoo
Messenger and add
moldinspector@yahoo.com in your contact list. To start
talking with our sales representative, please roll your mouse
over
moldinspector@yahoo.com on your Messenger List and click
on the “call” button. For details, please visit
Yahoo Messenger Voice! No Yahoo! ID yet? Please sign up at
Yahoo! website.
Alternatively, you can place
your order by calling our 24/7 SALES REPRESENTATIVE.
You can buy mold and other environmental
products and services on your Visa, Master Card, American
Express, or Discover credit card by phoning Mold Mart's
Phone Sales Center.
If you are phoning from the USA/Canada, please dial
011-63-34-471-3394
If
calling from outside of USA, please phone
63-34-471-3394
ASK YOUR MOLD PRODUCTS AND SERVICES
QUESTIONS
THRU THE FREE
Yahoo Messenger with Voice!
You can use the FREE Yahoo Messenger with Voice to ask your questions about mold testing and remediation products and services. To do so, simply log-in to Yahoo Messenger and add moldconsultant@yahoo.com in your contact list. To start talking with our sales representative, please roll your mouse over moldconsultant@yahoo.com on your Messenger List and click on the “call” button. For details, please visit Yahoo Messenger Voice! If you don’t already have a Yahoo! ID, please sign up at Yahoo! website.
Ask your own free personal mold advice question by emailing international mold expert Phillip Fry: moldconsultant@yahoo.com who will answer your question by return email. You can even email your mold photo's in jpeg file format.
Earn a high income as a Certified Toxic Mold Exterminator as a mold extermination subcontractor for Enviroremedy™ clients in your area, or for your own clients. Certified Water Inspector Learn how you can profit as a Certified Water Inspector. Read about drinking water problems.
|
|
|